本文主要目的是备份!
具体型号为:Realtek Semiconductor Co., Ltd. Device 8125 (rev 05)
安装前需要系统已经安装好make
工具。
文末下载驱动,然后解压,进入文件夹:
sudo ./autorun.sh
安装之后可以查看下网卡信息:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 |
Settings for enp4s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseX/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Cannot get wake-on-lan settings: Operation not permitted Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes |
附
件
下
载
本文最后更新于2021年8月19日,已超过 1 年没有更新,如果文章内容或图片资源失效,请留言反馈,我们会及时处理,谢谢!
我成功安装了但是在登录账号的时候提示:此设备已与Apple开发者计划或Apple开发者企业计划中的其他帐户关联请使用其他设备
感谢
你有没有群组或者什么的,这里讨论太麻烦了
这个 只能 ipad 用吗,在 iphone 上都配置好了,安装软件的时候出现:此团队中没有带有请求标识符的配置配置文件。
请问,这个SideServer是不是只能用苹果电脑装啊,手上没有苹果电脑怎么办呀!
棒诶
大佬研究一下猩红,我装也也会掉
不是很理解,自己手机导出的ipa?意思是必须用手机下载的才行吗?