马春杰杰 Exit Reader Mode

[mcj]CMake Error: The following variables are used in this project, but they are set to NOTFOUND.

马春杰杰
使用Cmake编译opencv源码遇到如下错误
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
CUDA_nppi_LIBRARY (ADVANCED)
linked by target “opencv_cudev” in directory D:/Cproject/opencv/opencv/sources/modules/cudev
linked by target “opencv_cudev” in directory D:/Cproject/opencv/opencv/sources/modules/cudev
linked by target “opencv_test_cudev” in directory D:/Cproject/opencv/opencv/sources/modules/cudev/test
linked by target “opencv_core” in directory D:/Cproject/opencv/opencv/sources/modules/core
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
原因解析：
cuda9不再支持2.0架构
解决方案如下：
1）.找到FindCUDA.cmake文件
找到行
find_cuda_helper_libs(nppi)
改为
find_cuda_helper_libs(nppial)
find_cuda_helper_libs(nppicc)
find_cuda_helper_libs(nppicom)
find_cuda_helper_libs(nppidei)
find_cuda_helper_libs(nppif)
find_cuda_helper_libs(nppig)
find_cuda_helper_libs(nppim)
find_cuda_helper_libs(nppist)
find_cuda_helper_libs(nppisu)
find_cuda_helper_libs(nppitc)

2）.找到行

set(CUDA_npp_LIBRARY "${CUDA_nppc_LIBRARY};${CUDA_nppi_LIBRARY};${CUDA_npps_LIBRARY}")
改为
set(CUDA_npp_LIBRARY "${CUDA_nppc_LIBRARY};${CUDA_nppial_LIBRARY};${CUDA_nppicc_LIBRARY};${CUDA_nppicom_LIBRARY};${CUDA_nppidei_LIBRARY};${CUDA_nppif_LIBRARY};${CUDA_nppig_LIBRARY};${CUDA_nppim_LIBRARY};${CUDA_nppist_LIBRARY};${CUDA_nppisu_LIBRARY};${CUDA_nppitc_LIBRARY};${CUDA_npps_LIBRARY}")
3）.找到行
unset(CUDA_nppi_LIBRARY CACHE)
改为
unset(CUDA_nppial_LIBRARY CACHE)
unset(CUDA_nppicc_LIBRARY CACHE)
unset(CUDA_nppicom_LIBRARY CACHE)
unset(CUDA_nppidei_LIBRARY CACHE)
unset(CUDA_nppif_LIBRARY CACHE)
unset(CUDA_nppig_LIBRARY CACHE)
unset(CUDA_nppim_LIBRARY CACHE)
unset(CUDA_nppist_LIBRARY CACHE)
unset(CUDA_nppisu_LIBRARY CACHE)
unset(CUDA_nppitc_LIBRARY CACHE)

4）.找到文件OpenCVDetectCUDA.cmake

修改以下几行

...
set(__cuda_arch_ptx "")
if(CUDA_GENERATION STREQUAL "Fermi")
set(__cuda_arch_bin "2.0")
elseif(CUDA_GENERATION STREQUAL "Kepler")
set(__cuda_arch_bin "3.0 3.5 3.7")
...
改为
...
set(__cuda_arch_ptx "")
if(CUDA_GENERATION STREQUAL "Kepler")
set(__cuda_arch_bin "3.0 3.5 3.7")
elseif(CUDA_GENERATION STREQUAL "Maxwell")
set(__cuda_arch_bin "5.0 5.2")
...

5）.cuda9中有一个单独的halffloat(cuda_fp16.h)头文件,也应该被包括在opencv的目录里

将头文件cuda_fp16.h添加至 opencv\modules\cudev\include\opencv2\cudev\common.hpp

即在common.hpp中添加

#include <cuda_fp16.h>

重新生成即可

本文最后更新于2019年5月21日，已超过 1 年没有更新，如果文章内容或图片资源失效，请留言反馈，我们会及时处理，谢谢！
 收藏 (0)